Installing a new spa pump is simple for people familiar with the spa anatomy. But like most of us, we haven’t the slightest clue where to begin. The thought of installing one of the most important components of your spa and the fear of breaking something in the process sends shivers down your spine.
For the brave souls who are willing to try installing the new spa pump, removing the old spa pump is the first step to reaching the goal line. To do this we first want to look at the way your spa is set up. A typical spa setup has a spa pump, control box and valves as seen in the picture .
Before we continue to the detachment of your old spa pump, make sure your spa is completely disconnected from all electrical outlets. If your spa has valves that allow the removal of your spa pump without draining, make sure those valves are closed. If your spa does not have these valves, drain your spa before installation.
PICTURE – VALVES
Now that you’re safe from electrocution and drowning yourself in a spa water wave, start disconnecting your spa pump by unscrewing the unions at both ends of the pump. Once you have those loosened, the pump is free and you may lift the pump out. You will want to remove the cord of your old spa pump. This can be used for your new spa pump unless you have purchased a new cord along with your pump. Cords come as an option when purchasing a new spa pump from PoolBargains.com.
As some of the smarter spa techs may have noticed, putting in your new spa pump is the exact reverse process of removing the spa pump. If you have purchased the correct pump all unions and spa pump components should fit perfectly into the old spa pump’s position. All you need to do it screw everything back on and plug in your spa. If you had closed the valves to prevent spa water from draining, reopen them and allow the water to flow into your new pump.
Before you purchase your new spa pump, try sending us a photo of the labels on the motor. We can match up the replacement motor for you at http://www.waterwayparts.com
This is a great time to replace the gaskets for the unions also.
waterwayparts 