Archive | December, 2013

What about Gallons Per Minute GPM?

27 Dec

Old Faithful jet with stainless steel trim.

Old Faithful jet with stainless steel trim.

Waterways Old faithful jet is one of the most common large volume jets. Always available at http://www.waterwayparts.com
• Old Faithful
o .925 orifice – 80-100 GPM
o 1.5 orifice – 120-175 GPM

Center vs. Side Discharge Pumps

26 Dec

viper3410630-15 CENTER DISCHARGE 002 AQUA FLO MASTER

 Swimming pool and spa pumps are classified, in part, according to the orientation of their discharge openings. Center discharge pumps have an opening located in the center of the wet end, while side discharge pumps have an opening located on the side of the wet end. Water is propelled through the openings and flows out through the jets in your spa. Side discharge pumps are up to 60% more efficient for pumping out high volumes of water than center discharge pumps. (SIDE DISCHARGE TOP PHOTO)

CENTER DISCHARGE BOTTOM PHOTO

Leisure Bay spa parts

18 Dec

cd-2hp-spl-red-wet-endLeisure Bay spa shells can last for 40 years. However, you will be replacing jets, motors, filters, heaters, and assorted fittings. There were several year models that used Waterway jets and Waterway motors. Several of these “proprietary ” parts are still available from Waterwayparts.com. Why replace your hot tub if a few parts can bring it back to life.

Image

It is important to use original manufacture parts.

11 Dec

It is important to use original manufacture parts.

All swimming pool or spa equipment is not the same. Some manufactures use proprietary plumbing parts. As example, a course thread, sometimes referred to as a buttress thread not only comes in different sizes but the threads can have different slants. A Waterway 1.5” buttress thread will not fit on Jacuzzi 1.5” buttress threads, Sta Rite 1.5 “ unions, or Waterco 1.5” buttress threads. These fittings may look alike but they will not seal correctly. Some hot tub equipment manufactures use standard pipe thread (spt), others may use course thread. When replacing equipment in a hot tub or spa you may not have the room to use conversion fittings and still have your equipment “line up”. Spend the extra time to replace your fittings with original equipment manufacture (OEM) parts. Waterway parts (www.waterwayparts.com) only uses OEM parts.

Image

Frozen Pump

9 Dec

Frozen Pump

The recent freeze may damage the “trap” part of your swimming pool pump. The trap lid, O-rings, or complete trap are all available at http://www.waterwayparts.com
Once the equipment thaws you will be able to see exactly what parts are cracked and leaking.