Archive | LA Z BOY SPAS RSS feed for this section

Spa pump cord

16 Jan

Your spa control power cord is dedicated to your model of control and must be re-used on your new pump. New pumps most often ship without a power cord

Remove the cord from your old pump, and note, (take a pic with your phone) the wire color going to high speed or low speed terminals on any motor, the color is set or determined by the maker of the spa control, not by the pump or motor manufacturer. Before you remove the power cord from your old pump, look at the old motor wiring label and make a note of what color goes to high, and to low. Then, put the cord on your new motor/pump, using the same color for high as on the old motor and also for low speed wiring.

THIS IS ONLY AN EXAMPLE!!!!!!

 

pump wire

Diverter Valve for La Z Boy Spas

12 Jan

IMG_1714

This 3 way Waterway Spa Diverter Valve has three 2″ slip connections.

The 2″ top access diverter valve can be repaired. The internal diverter is easily accessed by removing the lever and unthreading the notched ring. The (black) diverter is part number 602-0960. http://waterwayparts.com/-602-0960/

IMG_1712

This top access diverter is used in several brands of spas.

The La Z boy Spa part number is  #6010001

or the Hydropool Item Number is 6652PG .

IMG_1713

The color of the valve does not change the part number for the internals.

Also available are the o rings (small) http://waterwayparts.com/-805-0113/

and the larger  O-Ring (Inside Diameter 2-7/16″ ID
O-Ring Cross Section 3/32″) http://waterwayparts.com/-805-0143/