Archive | January, 2012

Rec Warehouse Chlorine feeder

30 Jan

This 4 tablet feeder was used with several different Rec Warehouse filter systems. The original feeder was all black, this interchangeable replacement is now available at www.waterwayparts.com as part # CAG004-W   We also stock all the parts and orings. The union is included with this unit.

Cyclone Filter by Rec Warehouse

29 Jan

The “belly band” for the Cyclone filter is available as a part.

www.waterwayparts.com   part # 511-7221

We also carry all the o rings, core centers, upper plate, and lower plate.

Rec Warehouse Drain Plug

28 Jan

Rec Warehouse Drain Plug

Rec Warehouse part # 111926
Waterwayparts.com part # 505-2020
This also works on the Sparco Sand Filter, Baquapure Sand filter, and Aquastar sand filter.

Image

REC WAREHOUSE SAND FILTER VALVE

27 Jan

REC WAREHOUSE SAND FILTER VALVE

BAQUAPURE

Aside

REC WAREHOUSE FILTER PARTS

27 Jan

This coupling for the Rec Warehouse Cyclone Filter connects the pump discharge to the intake of the cartridge ( or D.E. ) filter tank.

The nipple fitting is not drilled. It can be used for off line chlorinator fittings.

Part # 002325     Available at www.waterwayparts.com    Part # 419-7210

Nitro Pool Cleaner Parts

26 Jan

Drive motors vary in the way they connect to your Nitro pump motor. Version 1 (bottom) is generally used for cleaners sold prior to 2011. Version 2 (top) is needed for 2011 to present cleaners. The only difference is the clip (white on version 1) (black on version 2)  attached inside the pump motor casing. When you order from www. Waterwayparts.com please specify. We have both in stock and would be happy to assist you on the phone. You can email us a photo of the drive motor you need to replace.  sales@waterwayparts.com

Check Valves for pool or spa

25 Jan

Waterway Check valves have a clear lid with union lock ring and a bright seal flapper for easy inspection and quick access. CPVC Hi Temp plastic body which features deep sockets for better glue joints. Corrosion proof pin and stainless steel spring. All parts and whole goods are available at www.waterwayparts.com

What is a weir flap and is it required?

24 Jan


The weir flap is a doorway into the skimmer. It has two functions:
1.When the pump is on and the water is moving, the motion action of the weir helps draw debris into the skimmer.
2.When the pump is off, the weir prevents the debris from floating out of the skimmer into pool.

Yes, a weir flap is required in order to maximize the surface cleaning of the skimmer and hold in debris. Missing weir flaps must be replaced.

Aside

Stealth II Blowers

23 Jan

This high performance motor runs cooler and quieter. This blower is available in 110v and 220v. A noisy blower can ruin the relaxing effects of hot water therapy. One and two horsepower models are in stock at http://www.waterwayparts.com

Iron Might Pump

19 Jan

This is one of the most versatile pumps made by Waterway. It is used as a circulation pump in thousands of portable spas, it is perfect for large ponds, and is currently used as a portable pool (small above ground type) filter.  This pump can be ordered 220 v 0r 115volt. It delivers 40 gallons per minute and only draws 1.3 amps. We have both models in stock at www.waterwayparts.com