For many pools, skimmers also provide a connection point for vacuum systems. When you want to sweep the pool, a specially designed vac hose is connected through the skimmer using a vacuum plate, and when the pump is turned on, the suction will now power your pool vac.
Archive | April, 2014
Spa Pump problems.
6 AprDoes your spa pump’s motor shaft turn?
No:
Something could be stuck in the impeller. Take the wet end apart • and remove
obstruction.
Bearings may have locked up. If so, you will need to replace the pump / motor
assembly.
Ice in the wet end. If the weather is freezing, you need to allow it to thaw then
retry pump.
Yes:
Faulty capacitor. Change out the pump / motor assembly.
Faulty motor switch. Change out the pump / motor assembly.
Incorrect voltage. Make sure incoming voltage is correct
Image
Tiny Might
5 Apr1″ Thread / ½” Slip x 1″ Thread / ½” Slip
Available in 110v 0r 220v
http://www.waterwayparts.com