Your spa control power cord is dedicated to your model of control and must be re-used on your new pump. New pumps most often ship without a power cord
Remove the cord from your old pump, and note, (take a pic with your phone) the wire color going to high speed or low speed terminals on any motor, the color is set or determined by the maker of the spa control, not by the pump or motor manufacturer. Before you remove the power cord from your old pump, look at the old motor wiring label and make a note of what color goes to high, and to low. Then, put the cord on your new motor/pump, using the same color for high as on the old motor and also for low speed wiring.
THIS IS ONLY AN EXAMPLE!!!!!!
waterwayparts 