These Waterway pump traps look similar, but they are not interchangeable. Before you order a replacement be sure to check the size of the union nut that connects the trap to the face of the pump. The union nuts are different sizes and are labeled with different part numbers(as shown in lower pics). Trap 310-6500 will fit the Hi Flo and Hi Flo II pumps. Trap 310-5400 will fit the Iron Might, E Series, Spa Flo, TWM, and Center Discharge pumps.
https://waterwayparts.com/-600-3067/
Diverter Valve, WW, 2″, 3 Port, Top Mount, Notched, Gray
Identical to: 608053, 806105102089, 600-3067
Replacement diverter valve assembly for the valve found in many hot tubs with multiple pumps and a high number of jets.
Waterway Uni-Might, 34100300X 34100301X Waterway Uni-Might Circ Pump 3410030-0X 1-speed 115V 1.3-1.6A Circulation Pump, A.O. Smith 48 frame F48P82A79 motor, 1725 RPM, 60Hz 5.5 inch diameter motor. Rugged glass-filled ABS housing, 40 GPM, Viton seals, for 1-1/2 inch PVC pipe size. Uses 400-4060 pump unions, sold separately. Pump head can be rotated to 3 or 9 o’clock position, or other positions. Discharge is also internally threaded 1.5″ FPT. This pump is also available in a 220v version.
Can be used to replace the old Aqua-Flo Flo-Master VP 00710000-2 pump.FMVP, Aqua-Flo FMVP, Flo-Master VP
The most common problem with the multi port valve on a sand filter is the “spider gasket” (711-1910b), but replacing it can be a bit complicated. There are three different solutions for the repair. The easiest is to replace the entire internal assembly (600-9600)this method allows you to keep all the filter hoses attached and just remove the six bolts at the top of the valve. The assembly can only be re-inserted one way because of the notch in the side of the lid (you can’t mess it up).The second method is replacing the “plug” this method has the gasket already secured to the diverter but does require removing the handle and compressing the spring. The hardest but most economical fix is to replace the spider gasket only, but this entails removing the old gasket and properly securing the new gasket to the plug. Securing the gasket to the plug requires a level of expertise.You can try using 2 or 3 drops of super glue to hold it on to the plug. All these parts are available at http://www.waterwayparts.com
1 1/2 Inch Slip X 1/2 Inch Slip end style PVC manifold with 6 ports.This manifold is no longer available, but there is a easy alternative when working in tight spaces with spa plumbing. The 6 port manifold to 2 ” slip is still anufactured and will only require one additional fitting to reduce the 2″slip to 1.5″ slip. 421-4070 is the Waterway reducer to make this conversion.
For a look at the complete line of Waterway Plastics manifolds go to http://www.waterwayparts.com.
Waterway Jet Body 3/8 barb Air x 3/4 slipb water 228-0330 and 228-0338 Jet Body (Thread-In Style)This thread-in type jet body is now CLEAR for both fiber optic and non-fiber optic spas. If there is no in-jet lighting, the optic ports are not used.
2 ¼” hole size
Same form and function, just clear instead of white. https://waterwayparts.com/-228-0330/
Waterway Poly Gunite Jets are high performing and reliable jets for your spa. Specially designed for gunite spas, Poly Gunite Jets are a great way to add powerful massaging action to your spa. Retrofit an existing spa for a quick fix or an updated look and add additional years of use to your spa. Available in Directional, Pulsator, Roto, and Massage eyeball styles, each deliver a different jet experience. Featuring a scalloped or smooth face, the Poly Jets fit into a variety of bodies including Tee, Ell, and Straight to suit all types of spas. Also available in white(210-6090) at http://www.waterwayparts.com
Used in Beachcomber Spas pre 2001 (Beachcomber part 3001100)
The lid of the cartridge (or DE) filter will need to be removed to access the gauge lock nut. The lock nut(519-7441) should be unthreaded from the pressure gauge adapter (519-7431). The pressure gauge adapter is then pushed up through the lid, it is not threaded.
The pressure gauge adapter oring ( 805-0116EPB) is the smaller of the 2 orings. The larger Oring (805-0136B) fits the pressure gauge. The pressure gauge(830-4000) requires teflon tape to be threaded into the adapter.
Trap lids for SMF, Champion, Hi-Flo, E Series, and many more………..
The correct part number for the Waterway pump trap lid can be confusing. The three lids pictured above are all interchangeable, they all use the same oring (805-0436). The original lid (319-3260) was re designed with 2 pieces in 2016 to make it more durable and easier to remove. The lock ring was re worked in 2022 to make it easier to grip. The clear lid piece(319-3228) remained the same.
Just to add a little more confusion the trap lid for the SVL and Supreme pumps( 511-1310) looks like the original lid because it is one piece and all clear plastic, but it is a larger diameter(8.25″) and uses a different oring (805-0439)
For more technical assistance when ordering email: sales@waterwayparts.com
While having water move through the pipes is the best protection against freezing conditions, this is not possible during a loss of power event. Below are steps you can do to help minimize damage to your pool and equipment during a loss of power event. These steps should only be done in the event of power loss as running your pumps if a far better option in freezing conditions.
waterwayparts 