Archive | Leisure Bay spa jet RSS feed for this section

Diverter Valve for La Z Boy Spas

12 Jan

IMG_1714

This 3 way Waterway Spa Diverter Valve has three 2″ slip connections.

The 2″ top access diverter valve can be repaired. The internal diverter is easily accessed by removing the lever and unthreading the notched ring. The (black) diverter is part number 602-0960. http://waterwayparts.com/-602-0960/

IMG_1712

This top access diverter is used in several brands of spas.

The La Z boy Spa part number is  #6010001

or the Hydropool Item Number is 6652PG .

IMG_1713

The color of the valve does not change the part number for the internals.

Also available are the o rings (small) http://waterwayparts.com/-805-0113/

and the larger  O-Ring (Inside Diameter 2-7/16″ ID
O-Ring Cross Section 3/32″) http://waterwayparts.com/-805-0143/

NEO 2100 SPA CONTROL SYSTEM

3 Oct

Continue reading

Replace spa jet diffuser?

13 Jan

Replacing the jet diffuser can be a good option if the tabs that hold the jet into the housing are broken and the rest of the diffuser looks in good condition. If the diffuser is flaking and becoming brittle it is recommended to replace the entire jet. Why? If the diffuser is deteriorating then the rest of the jet internals including the bearings probably are too. This is caused by low Alkalinity, pH or Calcium. The white residue that is coming of the diffuser isn’t usually scale but the plastic deteriorating. In this case replacing the diffuser may be a short term fix, but you will most likely need a new jet soon.

 

New replacement jet 10-1343

Leisure Bay Green Pump

22 Dec

LEISURE BAY WET ENDYou may not need to replace the entire pump and motor, the impeller, volute, seal, orings, plug, or the entire “wet end” are all available. This is a 48 frame used in several Leisure Bay spas. Available at http://www.waterwayparts.com

Choosing the right Waterway spa pump….

12 Jan

IMG_2278To ensure the correct replacement, check the “nameplate” of your old pump, located on the side of the motor. The main information to look for on this label is:   Frame Size  (48 or 56)

Volts  (115 or 230)

HP

AMPS

CAT

Also, we will need the measurement (outside thread) of the intake and the discharge. Is the discharge Vertical? Horizontal?

Black Scalloped Jets

8 Jun

212-8151Try our part # 212-8151

http://www.waterwayparts.com

Image

5″ jets

7 Jun

xx-power_storm_5_inch2

Would the effects of partial immersion in a hot tub simulate the beneficial effects of exercise?

27 Mar

vandaber spa 011Results suggest that hot-tub therapy should be further evaluated as a therapy for patients with type 2 diabetes mellitus. Hot tubs and swim spas may be helpful for patients who are unable to exercise. The benefits could result from increased blood flow to skeletal muscles.

What about Gallons Per Minute GPM?

27 Dec

Old Faithful jet with stainless steel trim.

Old Faithful jet with stainless steel trim.

Waterways Old faithful jet is one of the most common large volume jets. Always available at http://www.waterwayparts.com
• Old Faithful
o .925 orifice – 80-100 GPM
o 1.5 orifice – 120-175 GPM

Leisure Bay spa parts

18 Dec

cd-2hp-spl-red-wet-endLeisure Bay spa shells can last for 40 years. However, you will be replacing jets, motors, filters, heaters, and assorted fittings. There were several year models that used Waterway jets and Waterway motors. Several of these “proprietary ” parts are still available from Waterwayparts.com. Why replace your hot tub if a few parts can bring it back to life.