1 1/2 Inch Slip X 1/2 Inch Slip end style PVC manifold with 6 ports.This manifold is no longer available, but there is a easy alternative when working in tight spaces with spa plumbing. The 6 port manifold to 2 ” slip is still anufactured and will only require one additional fitting to reduce the 2″slip to 1.5″ slip. 421-4070 is the Waterway reducer to make this conversion.
For a look at the complete line of Waterway Plastics manifolds go to http://www.waterwayparts.com.
Waterway Jet Body 3/8 barb Air x 3/4 slipb water 228-0330 and 228-0338 Jet Body (Thread-In Style)This thread-in type jet body is now CLEAR for both fiber optic and non-fiber optic spas. If there is no in-jet lighting, the optic ports are not used.
2 ¼” hole size
Same form and function, just clear instead of white. https://waterwayparts.com/-228-0330/
Waterway Poly Gunite Jets are high performing and reliable jets for your spa. Specially designed for gunite spas, Poly Gunite Jets are a great way to add powerful massaging action to your spa. Retrofit an existing spa for a quick fix or an updated look and add additional years of use to your spa. Available in Directional, Pulsator, Roto, and Massage eyeball styles, each deliver a different jet experience. Featuring a scalloped or smooth face, the Poly Jets fit into a variety of bodies including Tee, Ell, and Straight to suit all types of spas. Also available in white(210-6090) at http://www.waterwayparts.com
Used in Beachcomber Spas pre 2001 (Beachcomber part 3001100)
The lid of the cartridge (or DE) filter will need to be removed to access the gauge lock nut. The lock nut(519-7441) should be unthreaded from the pressure gauge adapter (519-7431). The pressure gauge adapter is then pushed up through the lid, it is not threaded.
The pressure gauge adapter oring ( 805-0116EPB) is the smaller of the 2 orings. The larger Oring (805-0136B) fits the pressure gauge. The pressure gauge(830-4000) requires teflon tape to be threaded into the adapter.
Trap lids for SMF, Champion, Hi-Flo, E Series, and many more………..
The correct part number for the Waterway pump trap lid can be confusing. The three lids pictured above are all interchangeable, they all use the same oring (805-0436). The original lid (319-3260) was re designed with 2 pieces in 2016 to make it more durable and easier to remove. The lock ring was re worked in 2022 to make it easier to grip. The clear lid piece(319-3228) remained the same.
Just to add a little more confusion the trap lid for the SVL and Supreme pumps( 511-1310) looks like the original lid because it is one piece and all clear plastic, but it is a larger diameter(8.25″) and uses a different oring (805-0439)
For more technical assistance when ordering email: sales@waterwayparts.com
While having water move through the pipes is the best protection against freezing conditions, this is not possible during a loss of power event. Below are steps you can do to help minimize damage to your pool and equipment during a loss of power event. These steps should only be done in the event of power loss as running your pumps if a far better option in freezing conditions.
The swivel inion is no longer manufactured, it was packaged with several popular Waterway pumps including some Power Defenders. We have a substitue available for the swivel which included lock nut 415-4060 and 2″ socket 417 2110. The substitute does not have the “swivel capacity” but does have the same size male thread and same size female slip.
The replacement union is available at http://www.waterwayparts.com
The most common reasons for a noisy pool pump can include: blocked lines, a blocked impeller, faulty bearings or unsecure mountings. These problems cause noises including: loud rattling, grinding, gurgling, whining, buzzing, high pitched noises and vibrations. Many pump noises can be fixed in just a few steps others may require a service call from a professional. While a noisy pool pump is certainly a pain, it’s fairly easy to troubleshoot . First locate the source of the sound—whether it be from the pump’s housing or the motor . It might be cavitation, internal blockage, improper mounting that causes vibrating or bad motor bearings. Even low water levels, clogged pipes, or cold water can cause pump noise. A pump run without sufficient water flow can actually “boil” the water inside the pump and melt the impeller.
Waterway Executive Series Spa Pumps
Both these Waterway Executive spa pump volutes ( the back half of the pump) have the same paumber molded into the plastic 315-1260. The placement of the brass inserts is different to accomodate different motors. At Waterwayparts.com the 48 frame part number is 315-1240 and the 56 frame is 315-1260
PRESSURE RELIEF VALVE SYSTEM REPLACEMENT
The pressure relief valve from the Crystal Water filter systems acts like a handle for the filter lid, pressure gauge, and air relief sytem. The “new” model (2022) will replace all older versions. The valve is interchangable with all previos models and is an improvement to the durability of the pressure relief.
Pressure Relief Valve System is available at www.waterwayparts.com
waterwayparts 