Pressure gauge assembly kit

There is a complete assembly to repair the pressure gauge on a Clearwater II, Eco Kleer, Blue Star, Clear Bay, or Premium Blue cartridge or D.E. filter.

https://waterwayparts.com/WATERWAY-CLEARWATER-2-PRESSURE-GAUGE-ASSEMBLY-830-4000CW2/

This kit contains everything you need to replace the entire assembly. This assembly is accessed from the inside of the tank lid by unthreading the gauge lock nut from the adapter fitting and pushing the gauge assembly up through the lid

.https://waterwayparts.com/WATERWAY-CLEARWATER-2-PRESSURE-GAUGE-ASSEMBLY-830-4000CW2/

ECO-KLEER SAND FILTERS

Waterwayparts.com can help you with your Eco-Kleer sand filter. If you need a parts list or replacement parts we ask you email your requests to sales@waterwayparts.com.

Because some of the parts may change from year model it is always helpful to include a image of your particular filter system.

Sand in your filter should be changed every 3-5 years. This might be a good time to inspect the laterals in the bottom of your tank to be sure they have not developed any cracks. If you have been getting sand shot back into your pool this could be the problem.

There are other issues that can cause the same problem. If the “spider gasket” in your top mount multi port valve is worn , or the spring in the valve is weak, or you have incorrectly attached your filter hoses you may also see sand on the bottom of your above ground pool.

Waterwayparts.com has all the parts needed to repair the multi-port valve or you may want to just purchase an entire new valve. Just email any questions to sales@waterwayparts.com

ECO-KLEER

We have the complete line of all ECO-Kleer pump and filter parts in stock. Impellers, seals, gaskets, trap lids, unions, and complete systems. You can call our consumer help line (210-650-4034) for the correct part #s. Or email an image of the pump you want to purchase parts for and we will email back the link to that part on our website. Eco-Kleer parts are always in stock and ready for shipping.